these are pretty reliable TANKS. hard to kill em
1 Like
Hello,
I am sorry to bother you…
Do you have any advice for a noob like me that would like to start mining?
What ASIC could I buy with around 2k?
Thank you
these came out in 2017 . their prolly one of the most reliable miners there is
1 Like
Thanks mate.
I really appreciated.
Could you articulate a bit more? Treat me like I know nothing xD.
What else should I count for?
The goal is to start entering in the mining world, being able to cover the investment.
What do you think about L3+ vs X5?
Thanks again
I’d say the l3 over a x5 for price and the l3 are tanks easy to set up and overclocking is easy can set up on 110 to start before upgrading your electric and you can get l3 for around 8 to 900 and if your electrical rate is good they are profitable and great way to get into mining
1 Like
I have 220v at home.
Could you point me to a guide for noobs like me, @Smokey024 ?
Where might I find them for 8-900$?
Two were posted in vosk discord yesterday for 1700
and on nicehash when u see the DIFF inc on ur mining. so does the profit. instead of using single workers, combine multiple to 1worker to get a higher accept rate = more profit
and yes profit increases also with ltc price, and also decreases… use to be ca 10$ per l3 @ ca 170 LTC
Are the L3+ machines in this picture have a tuned software or factory tuned? The factory numbers say 504mh/s (±5%)at 800w +10%.
Aalec269, I guess your L3+ 24 hour power calc was using something close to 20 cents per KWh. My L3+ machines cost me $2.30 per 24 hours @ 12 cents per KWh. So, four L3+ machines would use slightly more power than an S19J but only about $1 more in power per 24 hours. As mentioned, four L3+ machines would cost far less than one S19J.
BTW, I do not overclock my L3’s. I just use the latest Bitmain firmware.
1 Like