FYI KDA Miners,
Two Important things for successful Mining on DXpool,
1) Update your Goldshell KD5 Miner to firmware 2.1.6 or higher AND/Or Update your Goldshell KD Box to firmware 2.1.3 or higher. [Goldshell] How to Upgrade Firmware – goldshell miner
2) Pick the correct Stratum URL according to your location,
a. Asia - kda.ss.dxpool.com:6611
b. USA - kda-us.ss.dxpool.com:6611
c. Europe - kda-eu.ss.dxpool.com:6611
Dxpool has stepped up their KDA mining pool with world wide servers now (USA, EU, and Asia).
I’ve swapped over from Poolflare two days ago and so far the results have been solid. Very competitive when comparing against Poolflare.
Rejection rates range from 0.80% to 0.95% on any given day…
My 24 hr profits with just a KD box (Will update as time goes on),
03/22 = 1.0970
03/23 = 1.0710
03/24 = 1.0554
03/25 = 1.0494
03/26 = 1.0169
03/27 = 1.0515
03/28 = 1.0624
03/29 = 1.0613
Dxpools PPS method of payout allows for a consistent reliable daily profit, regardless if your just mining with a KD box, or with 10 KD5’s.
Do I dare say that we finally have another Solid KDA mining Pool to fully compete with Poolflare?
I think so!
FYI, good to see Voskcoin promoting Dxpool in his most recent KDA videos as well!
Dxpools servers,
Asia Stratum URL:
kda.ss.dxpool.com:6611
USA Stratum URL:
kda-us.ss.dxpool.com:6611
EU Stratum URL:
kda-eu.ss.dxpool.com:6611
1 Like
With a KD5 I have been pulling down a solid 11.8 coins a a day. Error rates are nothing like just 4 months ago. They vary but never over 5%, usually average 2%. Before DXpool would surge to 30% without provocation. Definately better on the 6611 port.
Past 9 days:
11.78
11.71
12.16
12.23
11.83
11.81
11.52
11.76
11.66
1 Like
What firmware are you using on your KD5?
2.1.0, was gonna move up but had no problems.
I kinda wanna know where ASICS miners page is getting 13.5 coins for it’s numbers.
Might get lower rejections by updating to latest firmware… Dxpool mentioned this sometime ago…
But I understand the concept, if it is not broken don’t change it…
it has not gone above 2% in the pat 23hrs.
1 Like
Interesting topic, I have my K1+ in poolflare. Maybe sometime I’ll switch it over if I heard more positive feedback!
1 Like
Isn’t it neat to talk about a completely different topic?
1 Like
Yes sir! And not about that master 
scammer hahaha
1 Like
I have 4 KDA boxes and very happy with DX POOL for many months now , my numbers mach yours and never a problem only when their website was down for a few days and you had to switch to .net .
They are good!!!
1 Like
Just wanted to give an update, got a good week of data, and DXpool is solid. Just slightly behind Poolflare. Dxpool is a good pool to set some of your miners to, to help decentralize KDA. If everyone used multiple pools instead of just lumping all of their miners in just one pool, KDA would be decentralize! And this is good for everyone.
Data from 1 KD box with firmware 2.2.1 and using DXpool US server,
Rejection rates range from 0.80% to 0.95% on any given day…
My 24 hr profits with just a KD box,
03/22 = 1.0970
03/23 = 1.0710
03/24 = 1.0554
03/25 = 1.0494
03/26 = 1.0169
03/27 = 1.0515
03/28 = 1.0624
03/29 = 1.0613
1 Like
That is what I am getting off of Poolflare within +/- .02. On my KD box there.
1 Like
That is almost exactly what I get , I really like DX pool ,very reliable .
DXPOOL was going well after I switched to the new US address. A couple days ago my rejection jumped to about 20%. I emailed support but haven’t gotten a response. Any one else having similar issues or know why? I’m ready to jump pools again.
Which firmware are you running? There’s a specific firmware that addresses the DX pool rejection issue. I believe it’s 2.1.6. Hope this helps you out!! 
1 Like
Hmmm… my KD box rejections during the same time had no issues…
My KD Box has the latest firmware update, 2.2.1.
Sprag,
That firmware should be good as anything 2.1.6 or higher will fix the DX issue.
1 Like
Running latest firmware 2.2.1
Been running DX Pool 4 months on 10 KD Boxes
so far seems going great for what they are
1 Like
