Thanks. I’m in. Now it tells me I’ve got the wrong password for the initial unlock section. I’m putting in 123456789 but keeps saying I’ve typed in the wrong password. My caps lock isn’t on… weird…
That should be it, I think . Add a zero at the begining to see if it works , but I don’t remember it having one though . If not, you’re gonna have to contact your supplier.
looks like I have to deal with the supplier. I bought from CryptoMinerBros. What are they like for technical support? Another quick question: is the light at the tops suppose to be a flashing blue light or should it be green?
Blue is mining
Someone else had this issue yesterday and I think they did a factory reset and then they were able to get everything setup. You may need to just reset the miner.
1 Like
hum… you probably are on to something. So when I happen to get into the web interface (it’s so sporadic… where do I go to do the factory reset?
okay found the place where I do the factory reset. But it won’t let me click to actually do the factory reset. It’s greyed out for now.
So I’ve managed to get into the interface/backend. But some interesting things. My mini’s light is blue… it looks like it’s mining. But i see no hashrate. See pictures
Are you sure your pool is setup correctly? My miners have a blue flashing light when they are hashing away and everything is working ok. Looking at your pics, it appears your pool is not setup. Check your pool info you have entered…
You are correct. The pool isn’t set up. I can’t unlock the miner. That’s the initial problem. Every time I press the “unlock” button… and then input 123456789 as the factory set password I get an error message that its wrong and nothing happens… this is such a headache right now trying to figure out what I’m missing or getting wrong. My Caps lock isn’t on. ???
My opinion would be to try a factory reset if the password is not working. There is a hidden button you will need to press with a pen below the blue flashing light. Hold it down for around 10 seconds, I think the miner should cycle off and on. After it does that, let it power back on and then you should be able to log into it and setup your pool like it was brand new. The default password should reset.
Okay thanks very much. I’ll give that a try and let you know what happens.
Make sure you are pressing the hidden recessed button and not the post sticking out, the post is for recognizing the ip when trying to setup.
1 Like
So… I did what you suggested. Was able to unlock the miner. So that’s a good step forward. But it still won’t let me do a factory reset in the interface or change pool settings. Weird. I’m going to do the hard reset again and keep trying. I’m wondering if this because of my Mac. I notice that in all the tutorials they use a Windows based operating system and the Goldshell interface looks different. On the Windows versions the Goldshell interface is green. On my Mac the Goldshell interface is Blue. Is that part of the problem? Goldshell dosen’t like Mac?
So very strange. It’s letting me add a pool. But won’t save it. And the interface doesn’t show my miner hashing at all.
I’m not sure about Mac being an issue, that’s a possibility, I used windows. I would try a different pool to see if that works. Maybe try litecoinpool or dxpool just to see if that gets you going.
So by process of elimination using a Mac isn’t the issue. But my Goldshell Mini Doge still isn’t mining or hashing. I bought this unit though CryptoMinerBros. There responses to my questions have been very slow and limited (mind you I know its a time difference and then the New Years holiday doesn’t help) but I haven’t been impressed with their customer service. They have passed it on to Goldshell Techs but haven’t heard anything from Goldshell. So its a frustrating time. I’ve got this cute little miner sitting on my kitchen table doing nothing but looking cute but not hashing or earning. I’m wondering if there is a problem with the SD Card in the unite. Is there a North American repair person or company for these Goldshell Mini Doge ASICs?
Bro you need to unlock, see top right, it says lock. Remove existing Pool config and add F2 with your credentials. And it should start working.
Hey bud, I just plugged in my mini doge miner and blue light is flashing. When i go to find my miner it shows the miner but when i click setting to proceed, i get a message that says this page can’t be reached took too long to respond. What can i do?
Connect the little antenna that comes with the miner, a new wifi signal should appear , connect to this new wifi signal from your computer and type 192.168.0.1 from there you should be able to setup your new miner .