Hi,
I received my first ever miner today but something seems wrong…
Or maybe it is just me who can’t figure it out…
I’ve got the following indicators:
At startup:
Above ethernet-cable: Steady green and blinking orange
Above power-cable: Steady green
Top of miner: Blinking red
All that seems fine but after running for about 30 sec the following indicators show:
Above ethernet-cable: Steady green and blinking orange Above power-cable: Steady red
Top of miner: Blinking red
Do anyone of you know what the problem is? I’ve tried to start it over a few times but the same problem accure…
Ok, i think I might have figure this one out. I was experiencing the same problem as you on my very last kd box set up just couple minutes ago. I’ll write it step by step for easy understanding. I hope this helps. Let me know if it worked for you or not.
Go to your wifi network and connect to your goldshell box (KD,CK, or what ever you see on your network). You will be immediately disconnected from your wifi network.
Type 192.168.0.1
Access your portal and change the language to English
Unlock your BOX
Go to systems and look for your wifi that you use everyday and connect.
Type in your wifi network password
Now the BOX should disconnect itself and immediately connect to your own network
Now go to find.goldshell.com and locate your miner. click on the little hex on the right
This should immediately take you to your personal goldshell dashboard
Now go add your pool information and save it!
That’s it! This is how I was able to fix the problem you are facing now. I hope this helps!
PS. I was able to connect to 192.168.0.1 even though the internet showed NO CONNECTION. Give it a shot
There’s also a Goldshell document that discusses this. It’s about half way down this document. I don’t know why Goldshell doesn’t print this and put it in every wireless Box miner…